Pushing to the Cloud

Now that you have created a new repository you have to supply it with some version data. GitHub provides many ways in which you can supply version data, which are helpfully described on the page given to you when you create a new repository (as seen below). We are going to use the third of these options, which is to push the version data from our local versioned_dir directory into our cloud versioned_dir GitHub repository.

Image of the post-creation page of GitHub

To do this, we need to tell Git running on our local machine, that it needs to use our GitHub cloud repository as a remote repository. This is achieved using the git remote add command.

First, ensure that the HEAD is at the latest commit on the master branch by typing

git checkout master

Use git status to double-check that your working directory is clean.

Now you will type the command

git remote add origin https://github.com/USERNAME/versioned_dir.git

where USERNAME is your GitHub username. My GitHub username is chryswoods, so I would type

git remote add origin https://github.com/chryswoods/versioned_dir.git

(note that GitHub helpfully tells you exactly what to type in the third option, e.g. find the above command in the picture above).

This command has told Git that we want to connect to a remote Git repository, which we are calling origin.

Pushing all of the version information

The next step is to push all of the version information from our local versioned_dir repository to the remote GitHub cloud repository. We do this by typing

git push -u origin master

You will be asked to type in your GitHub username and password. (note that if you enabled two-factor authentication - 2FA - on GitHub, then you will need to generate an access token for command line use and will need to use that instead of your password).

This tells Git to push all of the version information for the master branch to origin, which is the alias for the remote GitHub repository.

If the command works, you should see something like this (remembering to substitute “chryswoods” for your GitHub user name)

Username for 'http://github.com': chryswoods
Password for 'http://chryswoods@github.com': 
Counting objects: 25, done.
Delta compression using up to 16 threads.
Compressing objects: 100% (20/20), done.
Writing objects: 100% (25/25), 4.19 KiB | 0 bytes/s, done.
Total 25 (delta 2), reused 0 (delta 0)
To http://github.com/chryswoods/versioned_dir.git
 * [new branch]      master -> master
Branch master set up to track remote branch master from origin.

This output shows that Git has copied all of your version information for the local master branch to http://github.com/chryswoods/versioned_dir.git.

The final line of output says that, in addition, there is now a new link that will ensure that our local master branch will track the remote master branch from origin (remembering that origin is just an alias for http://github.com/chryswoods/versioned_dir.git).

So, what does this mean in practice? Open your web browser and navigate to https://github.com/USERNAME/versioned_dir, where USERNAME is your GitHub username. You should see something like this

Image of the GitHub versioned_dir repository

You should be able to see that all of your files are available on GitHub. By default, if your repository contains a file called README.md, then this is rendered and displayed at the bottom of the page (hence why we originally called this file README.md, and also why you can now see it rendered nicely. We will go into more about this later…)

Click on the button that says “9 commits” (in your case you may have a different number - just look for “N commits”, next to the icon that says “1 branch”).

This will take you to a page where you can see all of the commits that were made to the master branch, e.g. as here

Image of the GitHub commits page

Feel free to click on any of the commits. You should see a nice page that shows exactly what changed in the commit. For example, clicking on the commit in which we corrected the “cat goes woof” to the “cat goes mieow” shows

Image of the GitHub diff

Pretty cool right?

git push

Every time you want to push commits from your local repository to the cloud repository, you have to use a git push command. For example, edit the README.md file,

nano README.md

and change it so that the contents now read

# Hello GitHub

This is a README.md file that will be used to describe this
repository on GitHub

Run git status. You should see that Git knows that README.md has been modified.

Run git commit -a to commit this modified README.md to the local repository. Make sure you use a good commit message.

The last git commit -a command has saved this change as a new version of the master branch of the local repository. To copy this version to the cloud repository, you now need to type

git push

You will be asked your for your github username and password, and should see output similar to

Username for 'http://github.com': chryswoods
Password for 'http://chryswoods@github.com': 
Counting objects: 5, done.
Delta compression using up to 16 threads.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 454 bytes | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
To http://github.com/chryswoods/versioned_dir.git
   8a0f671..e1dd8ff  master -> master

Now, reload the GitHub page for your repository in your web browser (e.g. https://github.com/USERNAME/versioned_dir, where USERNAME is your GitHub username).

You should see that the number of commits has increased, and that the new README.md file is being shown, e.g. as in here

Image of GitHub, post-commit

If you navigate to the commit page for this latest commit, then you should be able to find the information for the latest commit, e.g. as here

Image of commit info

To ensure that your local and cloud repositories are kept in sync, always ensure that you use git push after you git commit -a.

Note - Everything free on GitHub is PUBLIC

Unless you have paid for a private repository, then everything you push to GitHub will be public. This means EVERYTHING, of EVERY version on the branch you push. If you are using a public repository make sure that you;

Note - Saving your username and password

Instructions to tell git to save your GitHub username and password are available here.

Essentially, you need to type;

git config --global credential.helper 'cache --timeout=3600'

to tell git to save your password in memory for one hour. You can test this by typing git push, which will first ask you for your username and password. However, this will now be saved, so that if you type git push again, then you won’t need to enter the details again.

Note - Responding to Changes in Git policy

Occasionally Git will change the way it works. Whenever it does this, it will give you a useful message telling you how to change things. For example, you may see the following message when you use git push

warning: push.default is unset; its implicit value is changing in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the current behavior after the default changes, use:

  git config --global push.default matching

To squelch this message and adopt the new behavior now, use:

  git config --global push.default simple

See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)

Git tells you how to remove this message, you just have to choose one of the commands. In this case, there is no reason not to adopt the new behaviour of Git, so we can type

git config --global push.default simple

and adopt the new simple push behaviour. Now, when we type git push we will only see

Everything up-to-date

Previous Up Next